Stephen created a table top to be used in the cabin. This was going to go along with the L-shaped bench he made!

He used seven 1×6 boards to make this top. Each 1×6 actually measures 0.75×5.5 inches, so the width of the top ended up being 38.5 inches. He cut the length of each board to be around 5 feet.

He used wood glue and did pocket holes to connect each board to the next. He let this sit for a few days. He then used a router to round off the edges.

I stained the table top, doing two coats. Check it out!

Check back to see what it’s like installed with the bench!